OTC Wireless WiSER2400.IP Manual do Utilizador descarregar pdf (Página 24)

3.4.2 Serial-IP-Proxy

MAC Address: the MAC address of the WiSER2400. This field is not

modifiable.

DHCP Enable: Allows the WiSER2400 to obtain IP address from a

DHCP server.

IP Address: The IP address of the WiSER2400, user configurable.

Listen Port: The port number used by the WiSER2400 to

communicate. This is the source port number in the

TCP/UDP packets sent from this WiSER2400.

Default value: 8002.

Subnet Mask: For configuring the subnet mask settings.

Gateway: For specifying the IP address of the Gateway.

Protocol

TCP (Client): For setting the WiSER2400 as a TCP Client.

TCP (Server): For setting the WiSER2400 as a TCP Server.

UDP: For setting up the WiSER2400 to run UDP protocol:

Receive Broadcast Packet: Optional operation mode to enable the

WiSER2400 to receive UDP broadcast

packets.

Send Serial Data Broadcast:

Optional operation mode to enable the data

received from the WiSER2400 serial port to be

transmitted wirelessly as UDP broadcast

packets.

Note: The WiSER2400 can only operate in either UDP

mode or TCP mode, but not in both modes

simultaneously.

Fig. 15 WiSER2400 administration software

Configuration/Serial-IP-Proxy panel

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Sem comentários

OTC Wireless WiSER2400.IP Manual do Utilizador Página 24